Guangdong Kenflo pump Limited by Share Ltd (formerly Guangdong Foshan Water Pump Factory Co., Ltd.)Official website：www.kenflo.com
IS series single stage centrifugal pump
Brief introduction：The IS/IR pump is a single suction (axial suction) centrifugal pump. The temperature of the IS pump is less than 80 ℃, and the temperature of the IR pump is less than 104 ℃.
National advisory service hotline:+86-757-82837226
The IS/IR pump is a single suction (axial suction) centrifugal pump. The temperature of the IS pump is less than 80 ℃, and the temperature of the IR pump is less than 104 ℃.
1、Comply with ISO2858 standard;
2、The rear opening structure is convenient for maintenance, and the pump cover and impeller can be servicing without dismantling the pipeline.
3、The axial seal of IS pump adopts packing seal or mechanical seal, and the axial seal of IR pump adopts mechanical seal.
4、In order to avoid shaft wear, a shaft sleeve is installed on the shaft through the packing chamber, and a O shaped seal ring is installed in the shaft sleeve to prevent air intake or air leakage along the mating surface.
5、The IS/IR pump is lubricated by oil.
It is suitable for industrial and urban water supply and drainage, and can also be used for agricultural irrigation and drainage, for the use of clean water or other liquids of physical and chemical properties similar to clean water. The IS type pump conveyed liquid temperature not more than 80 degrees, and the IR type pump conveyed liquid temperature not more than 104 degrees.
Order：IS series single stage centrifugal pump